Skip to content
Wilshire Lock & Key

24/7 locksmith · City of Industry, CA

Emergency Locksmith in City of Industry, CA

Wilshire Lock & Key provides emergency locksmith service in City of Industry, CA, around the clock, every day of the year. Lockouts, break-in damage, broken keys, and failed panic hardware are handled on site by a mobile technician. Call (213) 577-1366 and a real person answers, day or night.

  • Since 1987
  • Westwood storefront + mobile vans
  • A person answers, day or night
Mobile locksmith van at night with amber work lights on a city street

What counts as an emergency locksmith call in City of Industry?

An emergency is any situation where a door, lock, or key problem leaves people or property at risk, or stops work that cannot wait until morning. In City of Industry that usually means a locked-out employee or driver, a door forced open overnight, a key snapped off in a cylinder, or an exit device that will not release when it should.

We answer the phone at (213) 577-1366 at every hour, including weekends and holidays. Emergency door unlocking, emergency lockout service, and urgent lock securing are the core of what this page covers. Planned work, such as a full rekey or a new access system, is a different job, and we link to those pages further down so you can plan it once the emergency is over.

  • Locked out of a warehouse, office suite, or retail space
  • Door, frame, or lock damaged in a break-in or attempted break-in
  • Key broken off inside a lock or padlock
  • Panic bar or exit device stuck, jammed, or not latching
  • Roll-up door or gate that cannot be locked or opened
  • Car lockout in a parking lot or park-and-ride

Why emergencies here look different from a typical city

City of Industry is almost entirely industrial and commercial, with only a few hundred residents and very little housing. So when someone calls us from here, we are rarely standing at a front door with a standard deadbolt. We are far more likely to be dealing with steel doors, roll-up doors, panic devices, padlocks and hasps, and master key systems.

That changes how we work. A steel door set in a steel frame cannot be treated like a hollow residential door, and a forced roll-up door may need the track, the slide lock, and the hasp looked at together. We bring tools and parts that fit commercial hardware, and we try to open what is locked without cutting or drilling whenever the hardware allows it. If a part has to be destroyed to get you in, we say so before we do it.

How we handle an emergency call, step by step

The order matters when you are standing outside a building you cannot get into. This is how a typical emergency call goes.

  1. You call (213) 577-1366. Tell us the address, the type of door or lock, and what happened. A photo of the lock or the damage helps if you can send one.
  2. We ask a few safety questions first. Is anyone inside? Is the building open to the public right now? Do you believe the intruder is still on the property? If there is danger, call 911 before anything else.
  3. We tell you what we expect the job to involve and what will drive the cost, then confirm arrival timing based on current traffic and the 31 miles between our Westwood storefront and City of Industry.
  4. A technician arrives in a mobile service van carrying commercial hardware, and verifies that you are authorized to have the door opened. For a business, that usually means a manager, tenant, or property contact; for a vehicle, ownership of the car.
  5. We open the door using the least destructive method that works, then check the lock, strike, and frame for damage.
  6. If the lock is damaged or the key is compromised, we repair or replace what is needed so the building can be locked properly before we leave.
  7. We go over what was done and what, if anything, should be followed up later, so you are not surprised by it.

Locked out or need a locksmith now?

We answer around the clock, every day of the year.

Call (213) 577-1366

What we do after a break-in or forced entry

After a break-in, getting inside is not the main concern. The concern is leaving the property secure when we walk away. A door that was pried may look closed but have a bent latch, a cracked frame, or a strike plate that no longer holds. A roll-up door that was forced may lock on one side only.

We look at the whole point of entry. Sometimes a lock can be replaced and the door is fine. Sometimes a reinforcement plate, a new strike, or a different hasp is the right fix. Sometimes the right call is a temporary secure fix tonight and a proper repair during business hours, and we will tell you when that is the more sensible route.

If a former employee, tenant, or contractor had keys, the break-in may point to a bigger question about who still holds access. Rekeying or changing the lock is often the real answer, and our master key system service can restructure access so one lost key does not put the whole building in question. That is planned work, so we usually do it after the emergency is over.

Broken keys, jammed locks, and stuck exit devices

A key that snaps off in a cylinder is stressful, but it is usually recoverable. We use extraction tools made for that, and in many cases the lock continues working afterward. If the lock is worn or damaged, we replace the cylinder and cut a new key on the spot. Details on that work are on our broken key extraction page.

Exit devices are a different kind of urgent. A panic bar that will not release is a safety problem and, in a commercial building, a code problem. A bar that will not latch leaves the building open. We repair or replace the device so it works as intended; if you are considering a new device rather than a fix, our panic bar installation page covers that path.

Heat is part of the picture here. The area has hot inland summers, and extensive pavement and large industrial rooftops add to it. Sun exposure and thermal expansion can make steel doors, roll-up doors, and exterior gate hardware bind or stick. Not every sticking door is a lock failure, so we check alignment and movement before recommending replacement parts.

How much does an emergency locksmith cost in City of Industry?

We do not quote prices on a web page, because the honest answer depends on the job. What we can do is tell you what moves the number so nothing is a surprise when you call.

Factors that affect the cost of an emergency call:

  • Type of lock or door: a standard cylinder on a steel door is different from a high-security cylinder, an electrified device, or a roll-up slide lock.
  • Method needed: opening without damage is usually the more economical route than drilling, and drilling is usually lighter in cost than replacing a whole door or hardware set.
  • Time of day: nights, weekends, and holidays involve pulling a technician out of regular hours.
  • Distance and traffic: our storefront is about 31 miles away in Westwood, so travel is part of the picture.
  • Parts needed: new cylinders, strikes, hasps, padlocks, or exit devices are added only when the old ones cannot safely be reused.
  • Whether keys are needed: cutting or programming replacement keys adds to a lockout call.

Locked out or need a locksmith now?

We answer around the clock, every day of the year.

Call (213) 577-1366

Emergency lockouts at the Industry Metrolink station and elsewhere

Not every call here involves a building. Cars left at the Industry Metrolink station park-and-ride can end up with keys locked inside, and commuters are often under time pressure. Our car lockout service covers how we open vehicles without damaging the door, window, or weather seal.

We confirm vehicle details over the phone. Keys, key fobs, and programming requirements vary by make, model, and year, so we verify by VIN and in person rather than guess. Some vehicles can only have keys made through a dealer, and if yours is one of them we tell you plainly rather than start work we cannot finish.

There are very few residents in the city, but if the lockout is at a home or apartment elsewhere, see house lockout for how we handle that.

Emergency locksmith across City of Industry's corridors and ZIP codes

City of Industry spans ZIP codes 91744, 91745, 91746, and 91748, and the kind of emergency tends to follow the type of area you are in.

Along the Valley Boulevard industrial corridor, the buildings are warehouses and distribution centers. A typical emergency here is a master-keyed building where a key has gone missing, or a steel dock or personnel door that was forced overnight. Because many tenants share master key systems, a lost key can become a building-wide question, and we treat it that way.

On the Gale Avenue business corridor, we see industrial and office buildings with panic bars and exit devices that fail or get damaged. Those calls are about restoring both security and safe exit.

Around Puente Hills Mall and the surrounding big-box centers, retail lock problems come up after hours or at opening time, when a store cannot open or close properly. In the Grand Avenue business parks near SR-60, lock changes after employee turnover are a recurring scenario. When someone leaves on bad terms and keys are unaccounted for, that can become an urgent same-night lock change.

Industry Hills, including the Expo Center and Pacific Palms area, is a different setting again, with its own facility doors and vehicle lots. Wherever you are, if it is a business, our business lockout page goes into what we need from you to open a commercial door.

Why call Wilshire Lock & Key for an emergency

We have been in business since 1987, and David, our owner and lead technician, oversees the work. We run a real storefront at 10740 Wilshire Blvd in Los Angeles alongside our mobile service vans, so you are calling a company with an address, not a call center passing your job to whoever picks it up. There are no dispatch middlemen between your call and the technician.

We serve 140 cities across Los Angeles and Ventura counties, which means we are used to long drives and varied hardware. We are also honest about the distance: City of Industry is a drive from Westwood, and we would rather tell you that on the phone than promise something we cannot keep. If you want to understand our broader around-the-clock service, our 24-hour locksmith page explains it.

Locked out or need a locksmith now?

We answer around the clock, every day of the year.

Call (213) 577-1366

How to check any locksmith before they touch your door

California requires locksmith companies to hold a license from the Bureau of Security and Investigative Services (BSIS), known as an LCO license. Ask any locksmith for their license number before work begins, and look at how they answer. A real company gives a business name, an address, and a clear explanation of the job.

Be careful with anyone who will not name the business when answering, who will not explain what the job involves, or who changes the story once they arrive. In an emergency it is tempting to accept whatever comes first. Taking a minute to ask these questions is worth it.

Frequently asked questions

Do you really answer the phone at night and on weekends?

Yes. Our line at (213) 577-1366 is answered 24 hours a day, 7 days a week, year-round, including holidays. If it is an emergency, call rather than fill out a form.

Can you come out if I am locked out of a warehouse or office in City of Industry?

Yes. Commercial lockouts are a large part of what we see in the city. We confirm you are authorized to have the door opened, then open it using the least destructive method the hardware allows. Our business lockout page explains what we need from you.

How far are you from City of Industry?

Our storefront is at 10740 Wilshire Blvd in Westwood, about 31 miles from City of Industry. We serve the area with mobile vans, and we confirm arrival timing on the phone based on current traffic rather than promising a number we cannot control.

What should I do if my building was broken into overnight?

If anyone may still be on site or anyone is hurt, call 911 first. Once it is safe, do not touch or move the damaged door or lock more than necessary, take photos for your records, and call us. We will secure the opening and check the lock, strike, and frame so the building can be closed properly.

Will you have to drill or replace my lock to open it?

Not necessarily. Whenever the hardware allows, we open locks without damaging them. Drilling or replacement happens only when non-destructive methods will not work or when the lock is already damaged, and we explain that before we do it.

Can you fix a panic bar that will not release or latch?

Yes. We repair or replace exit devices on industrial and office buildings. A panic bar that will not release is a safety problem, so we treat it as urgent. If the device is beyond repair, we can discuss a replacement.

Can you make a new key for my car after a lockout?

It depends on the vehicle. Keys and programming differ by make, model, and year, and some cars can only have keys made through a dealer. We verify by VIN and in person, then tell you honestly what we can and cannot do. See our lost car key replacement page for more.

How do you decide what an emergency call will cost?

It depends on the lock and door type, the method needed, the time of day, the distance, and any parts or keys required. We explain those factors when you call and confirm what applies to your job before work starts, so you are not guessing.

Can I use a mobile locksmith for a planned lock change instead of an emergency?

Yes. If nothing is urgent, planned work is usually easier to schedule and the more economical route. Our mobile locksmith page explains how that works, and you can reach us anytime through the contact page or at (213) 577-1366.

More locksmith help in City of Industry

Emergency Locksmith near City of Industry

Reviewed by David, Owner & Lead Technician, Wilshire Lock & Key — in the locksmith trade since 1987.

Last updated 2026-10-11.

Ready for emergency locksmith in City of Industry?

We answer around the clock, every day of the year.

Call (213) 577-1366
Call Now: 24/7 — (213) 577-1366