2000 Toyota Tundra Key Replacement

The 2000–2002 Tundra uses the same key setup, so everything on this page applies to those years too. The full picture is on the Toyota Tundra key guide.

2000 Toyota Tundra: key facts

Key type: Mechanical (no chip)
Push-to-start: No
Transponder chip: None
Programming: NONE
All keys lost: We can originate new keys on site

Major transponder catalogs list no chip for 2000-2002 Tundras — most use a plain mechanical key with no programming. We confirm from the security light before cutting.

What kind of key does a 2000 Tundra use?

The data we work from shows a mechanical key for this truck. It is not a push-to-start system, and the major transponder catalogs list no chip for 2000 through 2002 Tundras. In plain terms, the key is a cut piece of metal that turns the ignition and the doors. Nothing has to be paired with the truck's computer.

That matters for you in a few ways. A replacement is a cutting job, not a programming job. We don't need dealer-level diagnostic access to the truck for this year. And you aren't stuck waiting on a locked-down process that only a dealership can run.

What keeps this from being a flat promise is the verification status. This year's record is marked unverified, so we treat the catalog result as a strong lead rather than a certainty. That is why we check the truck before we cut anything.

Spare copy or all keys lost: how each works on this truck

Because this setup is mechanical, the original key is not required to get a new one. If you still have a key, a duplicate is the simpler route and the lighter-cost option. We can copy it, though a worn original can produce a worn copy, and we will say so if yours looks tired.

If every key is gone, that is still workable on this truck. All-keys-lost is possible for this setup, and with no programming step involved, the job stays focused on the lock rather than on electronics. We cut a key that fits the ignition and then test it in the ignition and both doors before we call it done.

Have a key: duplicate it, and consider having a second spare made while we are there.
Lost every key: we make a new one without an original, which is why this is far less stressful than on a chipped vehicle.
Key turns the door but not the ignition: this is a different problem, covered below.

Why a 2000 Tundra key stops working

Our records list three common problems on this truck, and all of them come from age and use rather than from anything electronic.

Worn ignition wafers on high-mileage trucks. The small wafers inside the ignition cylinder wear down, and the key starts to feel loose, sticky, or unreliable.
Worn or bent key blades. A blade that has flexed or been ground down over the years may stop lifting the wafers correctly, and copying a bad blade copies the problem.
Door and ignition locks wearing at different rates. The door key may no longer turn the ignition, even though it still opens the door.

Locked out or need a locksmith now?

We answer around the clock, every day of the year.

Call (213) 577-1366

How we handle a 2000 Tundra key job

The process is short because the truck's setup is simple. Our storefront at 10740 Wilshire Blvd in Westwood handles walk-in work, and our mobile vans come to the truck if it is parked somewhere you can't leave.

You call (213) 577-1366. Someone answers at any hour, every day of the year.
We confirm the truck: year, model, and what the security light and key look like. Where the record is unverified, as it is here, we confirm by VIN or in person.
We check the condition of the lock. If the ignition wafers are worn, we tell you before cutting, since a fresh key in a worn cylinder won't solve the real problem.
We cut the key, and then test it in the ignition and in the doors.
If the ignition is the weak point, we explain the options. Sometimes it is a repair and sometimes it is a rekey of the cylinder.

What affects the price?

We don't quote numbers on a web page, because the job depends on facts we need to see first. For this truck, the main factors are straightforward.

Duplicate versus all keys lost. Copying a key you have is usually the more economical route.
Where the work happens. Coming to you in a mobile van is a different job from a walk-in at the storefront.
Time of day. Nights, weekends, and holidays are different from regular hours, and we will tell you before work begins.
Lock condition. Worn wafers or a worn ignition cylinder can add repair or rekey work on top of the key itself.
Number of keys. Cutting a second key at the same visit is usually less effort than coming back later.

One honest note on what we have not verified

For the 2000 Tundra, our data does not name a transponder chip family, and the year is marked unverified. The catalogs we rely on show no chip for 2000 through 2002, and most trucks of this vintage use a plain mechanical key with no programming. That is the likely answer, not a promise. We confirm from the security light, and by VIN when needed, before cutting. If we find something different, we tell you before any work starts.

Whoever you call, ask for their California BSIS LCO locksmith company license. California requires it, and a legitimate shop will give it to you without fuss.

Why call Wilshire Lock & Key

We have been in business since 1987, and David, the owner and lead technician, oversees the work. You are dealing with one company with a storefront and its own vans, not a dispatch middleman who hands your call to a stranger. We serve 140 cities across Los Angeles and Ventura counties. If you need more on the model, see our Toyota Tundra key page, or browse Toyota car keys and the full car key service overview. To reach us directly, use the contact page or call (213) 577-1366.

Frequently asked questions

Does a 2000 Toyota Tundra need a programmed key?

Based on our data, no. The truck uses a mechanical key, and catalogs list no chip for 2000 through 2002 Tundras. Because the year is marked unverified, we confirm from the security light before we cut.

Can you make a key if I lost all of them?

Yes. For this setup, all-keys-lost is possible, and the original key is not required. We cut a new key and test it in the ignition and doors.

Do I need my original key to get a copy?

No. The original is not required for this truck. Having one makes a duplicate simpler, but a worn blade can pass its wear on to the copy.

My key opens the door but won't turn the ignition. Why?

Door and ignition locks on these trucks can wear at different rates, so a key can still work in one and not the other. Worn ignition wafers are a common cause on high-mileage trucks. We inspect before deciding on a new key, a repair, or a rekey.

Is this a push-to-start truck?

No. The 2000 Tundra uses a mechanical key in a standard ignition.

Will you come to my truck?

Yes. We have a storefront at 10740 Wilshire Blvd in Westwood and mobile service vans. Call (213) 577-1366 and we will work out the best way to reach you.

How do I know a locksmith is legitimate?

California requires locksmith companies to hold a BSIS LCO license. Ask any locksmith for it before they start work.

We cover all these cities

Reviewed by David, Owner & Lead Technician, Wilshire Lock & Key — in the locksmith trade since 1987.

Last updated 2026-10-11.